DynaColor S3 Bedienungsanleitung PDF herunterladen (Seite 10)

2.1.2 Network

Description: Network interface settings. The parameters in this group (as opposed to the su/jointfilesconvert/278193/bgroups of

this group) are static network settings. If the Network.BootProto parameter is "dhcp" these parameters

may not be in use so always use the read-only parameters in the su/jointfilesconvert/278193/bgroups to retrieve actual network

settings in use by the operating system.

Configuration file: /etc/sysconfig/network.conf

[Network]

Parameter name Default value Valid values Description

BootProto none dhcp,

none

Enable/disable dynamic IP

address assignment to the device.

IPAddress 192.168.0.250 An IP address IP Address. The physical address

of the device on the network.

SubnetMask 255.255.255.0 An IP address Subnet mask. Divides the

network.

Broadcast 192.168.0.255 An IP address Broadcast address. Used to

disseminate information to

several recipients simultaneously.

DefaultRouter 192.168.0.254 An IP address Default router/gateway used for

connecting devices attached to

different networks and network

segments.

HostName MegaPixelCamera A host name The name of the device on the

network, usually the same as the

DNS name.

DNSServer1 0.0.0.0 An IP address Primary Domain Name System

server.

DNSServer2 0.0.0.0 An IP address Secondary Domain Name System

server.

Port 80 80

1024 ... 65535

The port of web server.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Keine Kommentare

DynaColor S3 Bedienungsanleitung Seite 10