DynaColor S3 Bedienungsanleitung

1IP Camera API Parameter Specification Revision: 2.04 Date: 2010-Dec-3 TABLE OF CONTENTS 1 OVERVIEW ...

102.1.2 Network Description: Network interface settings. The parameters in this group (as opposed to the subgroups of this group) are static network

112.1.3 Network.PPPoE Description: PPPoE setting for authorized connecting to internet. Configuration file: /etc/sysconfig/network.conf [Network.PPPo

12This parameter is read only. SubnetMask 255.255.255.0 An IP address (Auto generated) Subnet mask. Divides the network. This parameter is read onl

132.1.6 Network.RTSP Description: Parameters needed by the RTSP daemon. Configuration file: /etc/sysconfig/network.conf [Network.RTSP] Parameter na

14H264VideoPort2 0 0, 1024 ... 65535 The port number for the RTP H.264-2 video stream. 0 means no distribution. MjpegVideoPort 0 0, 1024 ... 65535

152.1.9 Network.UPnP Description: Enable/disable Universal Plug and Play and set the name to be displayed in UPnP-clients. Configuration file: /etc/c

162.1.11 Network.Filter Description: Allowing/denying the listed IP addresses to access the IP Camera. Configuration file: /etc/sysconfig/network.con

172.1.13 Network.Interface.I0.dot1x Description: Parameters configurations for network system with EAP-TLS authentication support. Configuration file

18receive the same forwarding treatment from routers Class2.Desc LiveAudio LiveAudio Class2 represents audio service, which is only available in the

192.1.16 SMTP.MailServer# Description: Parameters for the Simple Mail Transfer Protocol, for sending e-mail messages between mail servers. Configura

22.2.7 ImageSource.I0.Sensor ... 32 2.2.8 ImageSource.I0.Video ...

202.1.18 SNMP Description: Configure the SNMP agent that resides on the managed device in SNMP-managed network. Configuration file: /etc/sysconfig/sn

212.1.19 HTTPS Description: Parameters for Hypertext Transfer Protocol Secure (HTTPS) Configuration file: /etc/sysconfig/https.conf [HTTPS] Parameter

222.2 H.264/MPEG-4/MJPEG 2.2.1 Image Description: Common image parameters used for all image configurations. Configuration file: /etc/sysconfig/image

232.2.2 Image.I0.Appearance Description: Image appearance parameters (resolution, compression, rotation) for each image configuration. Configuration

24IP PTZ: 2 0 … 2 Video Server: 0 … 2 H264Bitrate HD WDR IP Camera: 2048 HD IP Camera: 4096 V Series: 4096 IP PTZ: 4096 HD WDR IP Camera: 64 … 800

25720p, disable, 720p, disable HD IP Camera: 720p, 720p, disable V series: 720p, 720p, disable IP PTZ: d1, d1 quadvga(CCD), sxga(CMOS), 720p, d1, vga

262> Video Server: d1, d1 cif, d1 The format is <resolution_MJPEG>, <resolution_H.264-1>,<resolution_H.264-2> Rotation HD WDR

2725(PAL) which is the start of decoding. The default value depends on the TV system user choose. Mpeg4VideoKeyFrameInterval HD WDR IP Camera: 30(NT

28Type HD WDR IP Camera: solid HD IP Camera: solid V Series: solid HD WDR IP Camera: solid, transparency HD IP Camera: solid, transparency V Series:

29YPos HD WDR IP Camera: 22 HD IP Camera: 10, when#=0; 10, when#=1 V Series: 10, when#=0; 10, when#=1 HD WDR IP Camera: CCD: 0 … 119 CMOS: 0 … 127 H

32.11.2 GuardTour.G#.Tour.T# ... 58 2.12 Audio ...

302.2.5 Image.I0.RateControl Description: Parameters to control the bit rate (bandwidth) from the server. Configuration file: /etc/sysconfig/image_r

31produce streams with a frame rate lower than this value. This parameter is read only. 2.2.6 Image.I0.Text Description: Image text overlay paramete

322.2.7 ImageSource.I0.Sensor Description: Parameters for each CCD/CMOS image source. This parameter group is product dependent and only available in

335000, 3333, 1666, 833, 400, 200, 133, 100, 83, 66, 46, 33, 23, 16, 8, 4, 2 ,1) IP PTZ: Sony auto, shutterpriority0 … 21, irispriority1 … 17 brightp

34IP PTZ: auto V Series: auto, manual IP PTZ: Sony auto, fixed_indoor, fixed_outdoor, ATW, manual Hitachi auto, manual Dynacolor auto, fixed_indoor,

35Backlight HD WDR IP Camera: off IP PTZ: off HD WDR IP Camera: on, off IP PTZ: on, off Enable/Disable Backlight Compensation. Brightness HD WDR

36V Series: 128 V Series: 0 … 255 Digitalzoom HD WDR IP Camera: 1 IP PTZ: off HD WDR IP Camera: 1 … 16 HD IP Camera: 1 … 12 IP PTZ: on, off The ima

37Dynacolor off Dynacolor on, off Reduction function. 3DNR IP PTZ: Dynacolor off IP PTZ: Dynacolor on, off Enable/Disable 3D Noise Reduction fu

38dependent ModuleType IP PTZ: hitachi, sony, dyna Which type of camera module is used. (Read only), only available in IP PTZ. The values are pro

392.3.3 Output Description: Parameters for hardware output(s). Configuration file: /etc/sysconfig/outputs.conf [Output] Parameter name Default valu

4DOCUMENT HISTORY Version Date Comment 2.01 2009-Aug-27 Initial version. 2.02 2009-Dec-18 HD WDR Camera: Add motion group parameter Add time parame

402.4 Events 2.4.1 Event.E# Description: This group defines an event, which is a set of parameters describing how and when the product performs certa

412.4.2 Event HW Actions Description: This group defines an action that controls a digital output. Configuration file: /etc/sysconfig/event.conf [Ev

42of FTP event servers - 1) a parameter group under root.EventServers.FTP. Example: "F0" refers to the parameter group root.EventServers.FT

43EmailTo2 E1 E0, E1 Refers to SMTP.MailServer1.EmailTo Primary SMTP consignee. Refers to a parameter group under root.SMTP Example: "E0"

44no (continue image upload) BestEffortDuration 0 0 … 99999 Best effort duration (in number of seconds). If InludeBestEffort = yes and BestEffort

45PostFrame 5 1 … 20 Number of post-trigger frames. IncludeBestEffort no yes, no Use best effort duration (continue image upload) BestEffortDurat

461 1 … 4 2: sequence 3: autopan 4: cruise FunctionLine IP PTZ: An unsigned integer Depends on PTZ function DwellTime IP PTZ: 0 IP PTZ: 0 … 127

47* Note: the # is replaced with a group number, 0 means triggered by digital input, 1 means triggered by motion detection input. e.g. Event.E0.Actio

48* The parameters mentioned above are currently only available for HD IP Camera & V Series Camera. 2.5 Event servers 2.5.1 EventServers.FTP.F#

49Address An IP address or a host name URL to the server, including name of CGI script to handle the request. Example: "http://192.168. 254.

5Add 2.17 Tampering Add 2.19 RS-485 Control 1 OVERVIEW This document specifies the parameters and configuration files for H.264 IP camera including

502.6.2 Time.NTP Description: Contain parameters required when setting time and date with the NTP protocol. Configuration file: /etc/sysconfig/time_

51month. Otherwise StartDay indicates the number of days since Sunday in the range 0 to 6. StartMonth 0 0 … 11 The number of months since January

52The last Sunday of the month Example 3: StartTypeOfDate = 1 StartDay = 5 The first Friday of the month Example 4: StartTypeOfDate = 15 StartDay = 0

532.7 Properties Description: Contains information about the firmware and system of the product. It also contains information about product dependent

542.7.3 Properties.Firmware Configuration file: /etc/sysconfig/properties.conf [Properties.Firmware] Parameter name Default value Valid values De

552.7.5 Properties.PTZ Configuration file: /etc/sysconfig/properties.conf [Properties.PTZ] Parameter name Default value Valid values Description

562.8.2 PTZ.Limit Configuration file: /etc/dynamic/ptz.conf [PTZ.Limit.L0] Parameter name Default value Valid values Description Mintilt 0 -10 …

572.10 Cruise (IP PTZ exclusive) 2.10.1 Cruise.C# Description: Contain parameters to create PTZ cruise Configuration file: /etc/sysconfig/cruise.conf

582.11.2 GuardTour.G#.Tour.T# Description: The PTZ preset positions that are included in the guard tour. Configuration file: /etc/dynamic/ guardtour.

59post = Simplex. Audio to the server. get = Simplex. Audio from the server. disable=Disable the Audio function. 2.12.2 AudioSource.A0 Description:

6Hitachi R: 22x M: 23X, WDR P: 35X, WDR 1.1 Product and firmware versions The support for the parameters specified in this document is highly produc

602.13 Recording 2.13.1 Recording.R0 Description: Recording parameters used for recording schedule. Configuration file: /etc/sysconfig/recording.conf

612.14 DDNS 2.14.1 DDNS Description: Common DDNS parameters used for all DDNS configurations. Configuration file: /etc/sysconfig/ddns.conf [DDNS] Par

622.15 Frame skip 2.15.1 Frame skip Description: Common frame skip parameters used for all frame skip configurations. Configuration file: /etc/syscon

632.: Frame skipping at 10 frame internal 3.: Frame skipping at 15 frame interval Video Server: 0: No skip, default 1.: Frame skipping at 5 frame int

64Left HD WDR IP Camera: 5, when #=0,5; 10, when #=1,6; 15, when #=2,7; 20, when #=3,8; 25, when #=4,9 HD IP Camera: 5, when #=0,5; 10, when #=1,6;

658, when #=0,5; 13, when #=1,6; 18, when #=2,7; 23, when #=3,8; 28, when #=4,9 IP PTZ: 8, when #=0,5; 13, when #=1,6; 18, when #=2,7; 23, when #=3,8

662.16.2 Motion Description: The group is for the setting of motion detection window. Configuration file: /etc/sysconfig/motion.conf [Motion] Parame

672.17 Tampering 2.17.1 Tampering Alarm Description: Minimum duration in the camera tampering settings determines the timing of identifying tampering

682.19 RS-485 Control 2.19.1 RS-485 Control Description: This group defines an action that allows implementation of RS-485 control for the models wit

7A host name A string limited to contain a host name. An IP address A string limited to contain an IP address of the format xxx.xxx.xxx.xxx, where

8

92 PARAMETER GROUPS 2.1 General 2.1.1 Brand Description: Contains information about the brand, name and type of the product. Configuration file: /etc