DynaColor QIG-510 Series Installationsanleitung PDF herunterladen (Seite 20)

- 20 -

Serial Port

PTZ port

1 port, RS-232 or RS-422/485 terminal block

connector, 115.2 Kbps max. baudrate

Console port

1 RS-232 RJ45 port

GPIO

Digital Inputs

4, max. 8 mA

Low: +13V to +30V

High: -30V to +3V

Relay Output

2 (max. 24 VDC @ 1A)

LED Indicators

STAT

Indicates if system has booted up properly

PWR1

Power 1

PWR2

Power 2

FAULT

Can be configured for system alarm, includes power

failure and network down.

V1, V2, V3, V4

Video input signal active

Power

Inputs

2 12/24 VDC or 24 VAC for redundancy

Consumption

Approximately 7.5W

Mechanical

Casing

IP30 protection, metal case

Dimensions

80.2 x 135 x 105 mm (3.17 x 5.31 x 4.13 in.)

Weight

1100 g

Installation

DIN-Rail or wall mounting

Environmental

Operating

Temperature

0 to 60°C (32 to 140°F)

-40 to 75°C (-40 to 167°F) for -T models

Storage

Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative

Humidity

5 to 95% (non-condensing)

Regulatory Approvals

Safety

UL 508 (Pending)

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

EN61000-4-2 (ESD), Level 2

EN61000-4-3 (RS), Level 3

EN61000-4-4 (EFT), Level 3

EN61000-4-5 (Surge), Level 3

EN61000-4-6 (CS), Level 3

EN61000-4-8

EN61000-4-11

Shock

IEC60068-2-27

Freefall

IEC60068-2-32

Vibration

IEC60068-2-6

Warranty

5 years

Alarm Features

•

Video Motion detection with sensitivity tuning

• Video loss alarm.

• Daily repeat timing schedule.

• JPEG snapshots for pre/trigger/post alarm images.

• Automatic transfer of stored images via email or FTP with

event-triggered actions.

• HTTP event servers and CGI commands for setting customized alarm

actions.

1 2 ... 15 16 17 18 19 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

DynaColor QIG-510 Series Installationsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras DynaColor QIG-510 Series