DynaColor SL H.264 WD1 Technical Information PDF herunterladen (Seite 52)

OSD Setup Manual

< Export Configuration >

Users are allowed to save a DVR configuration by exporting it to an external drive, such as

a USB Flash Drive. Before exporting the configuration, make sure the device in which the

configuration will be saved is attached to the DVR correctly. Select <Export Config> from

the Configuration menu. The following menu is displayed.

Export Config

Copy Destination

Config Name

Begin Export

Items in this menu are described in the following sections.

 Copy Destination

Select this item to list available destinations (external storage devices) where

the configuration can be exported. Select a destination and choose <Yes> to

set it as the copy destination. Note that saving a different configuration to the

same destination with the same file name will overwrite the previous

configuration file without warning.

Copy Destination

Device Name

xxxx-xxxx

Select

NOTE: For models with built-in DVD+RW, it is not allowed to select

the DVD+RW as a copy destination.

 Configuration Name

This item allows users to assign a name to the exported configuration file.

Use the virtual keyboard to enter the configuration file name. Note that the file

name can only contain up to 15 characters, including spaces.

 Begin Export

Select <Yes> to begin exporting the configuration file, or <No> to abort the

export.

NOTE: It is strongly recommended to export configuration before

upgrading the DVR system. Also, backup the configuration routinely is

recommended, in case for unexpected condition.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Pepe 04 Oct 2024 | 16:28:51

Nada

DynaColor SL H.264 WD1 Technical Information Seite 52